Skip to main content

DFU Override

Both legacy and current boards may require manual DFU intervention when an error state prevents normal firmware updates.

On NavX IMUs hold down the CAL button while applying power. This will boot the board into bootloader mode allowing for the to flash or re-flash firmware.

VMX Robotics Controllers​

On VMX Robotics Controllers hold down the CAL button while applying power. This will boot the board into bootloader mode allowing for the to flash or re-flash firmware.

Titan Motor Controllers​

On Titan Motor Controllers hold down the boot button while applying power. This will boot the board into bootloader mode allowing for the to flash or re-flash firmware.

Servo Manager​

On the Servo Manager hold down the boot button located on the back while applying power. This will boot the board into bootloader mode allowing for the to flash or re-flash firmware.

Parsec and Colore​

Do not have boot buttons or a way for the user to bump into DFU mode. Studica has gone to great lengths to ensure that this should never happen with these devices. Should it happen go to the bottom of this page and contact support.